如何给2003excel设置密码(2003版excel如何设置密码)

1. 2003版excel如何设置密码

操作方法

01

在手机中找到“安全中心”，点击打开。

02

在主页面里面向下拉，在安全工具里面找到应用锁，点击进入。

03

第一次进入的时候需要设置密码，点击图标下面的小字可以设置密码类型。

04

还可以设置指纹。

05

现在就可以设置锁定应用了，点击应用后面的开关即可。

06

点开右上角的设置，还可以锁定时机、是否屏蔽消息等。

2. excel表格2003怎么设置密码

这个要看是什么版本的Excel EXCEL2003: 方法1 工具---保护---写密码----确定 (这种方法保存的表格不能防止他人查看工作表中的内容） 方法2 工具----选项---安全性----打开权限密码 EXCEL2010: 文件保存后： 文件--信息--保护工作簿里面有设置密码/权限的选项，根据需要设置！

3. 2003excel怎样设置密码

步骤/方法 1 在Word2003中单击菜单栏上的【工具】。 选择【选项】打开，会弹出一个对话框。 在弹出的对话框中选择【安全性】点击。 打开后找【此文档的文件加密选项】在里面输入密码。 点击确定按钮。 点击确定后，又会在弹出一个对话框，提示确认密码。 再输入一次密码。点击确定。 设置【修改文件时的密码】。 设置后只能查看文档，不能修给文档内容。若要修改必须输入修改密码。按照上面的方法依次打开到【安全性】窗口，然后在【此文档的文件共享选项】里输入密码。 确定后，再次输入一次【确认密码】。 完成后，选择工具栏的保存按钮保存文件。 打开查看文件。 打开文件时会弹出输入打开文件密码。 输入打开文件密码后，又会弹出输入【修改文件密码】。如果不需要修改文件可以选择【只读】就打开文件了。

4. excel 2003设置密码

EXCEL工作表保护密码破解

方法:

1\打开文件

2\工具---宏----录制新宏---输入名字如:aa

3\停止录制(这样得到一个空宏)

4\工具---宏----宏,选aa,点编辑按钮

5\删除窗口中的所有字符(只有几个),替换为下面的内容:(复制吧)

6\关闭编辑窗口

7\工具---宏-----宏,选AllInternalPasswords,运行,确定两次,等2分钟,再确定.OK,没有密码了!!

内容如下：

Public Sub AllInternalPasswords()

' Breaks worksheet and workbook structure passwords. Bob McCormick

' probably originator of base code algorithm modified for coverage

' of workbook structure / windows passwords and for multiple passwords

'

' Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1)

' Modified 2003-Apr-04 by JEM: All msgs to constants, and

' eliminate one Exit Sub (Version 1.1.1)

' Reveals hashed passwords NOT original passwords

Const DBLSPACE As String = vbNewLine & vbNewLine

Const AUTHORS As String = DBLSPACE & vbNewLine & _

"Adapted from Bob McCormick base code by" & _

"Norman Harker and JE McGimpsey"

Const HEADER As String = "AllInternalPasswords User Message"

Const VERSION As String = DBLSPACE & "Version 1.1.1 2003-Apr-04"

Const REPBACK As String = DBLSPACE & "Please report failure " & _

"to the microsoft.public.excel.programming newsgroup."

Const ALLCLEAR As String = DBLSPACE & "The workbook should " & _

"now be free of all password protection, so make sure you:" & _

DBLSPACE & "SAVE IT NOW!" & DBLSPACE & "and also" & _

DBLSPACE & "BACKUP!, BACKUP!!, BACKUP!!!" & _

DBLSPACE & "Also, remember that the password was " & _

"put there for a reason. Don't stuff up crucial formulas " & _

"or data." & DBLSPACE & "Access and use of some data " & _

"may be an offense. If in doubt, don't."

Const MSGNOPWORDS1 As String = "There were no passwords on " & _

"sheets, or workbook structure or windows." & AUTHORS & VERSION

Const MSGNOPWORDS2 As String = "There was no protection to " & _

"workbook structure or windows." & DBLSPACE & _

"Proceeding to unprotect sheets." & AUTHORS & VERSION

Const MSGTAKETIME As String = "After pressing OK button this " & _

"will take some time." & DBLSPACE & "Amount of time " & _

"depends on how many different passwords, the " & _

"passwords, and your computer's specification." & DBLSPACE & _

"Just be patient! Make me a coffee!" & AUTHORS & VERSION

Const MSGPWORDFOUND1 As String = "You had a Worksheet " & _

"Structure or Windows Password set." & DBLSPACE & _

"The password found was: " & DBLSPACE & "$$" & DBLSPACE & _

"Note it down for potential future use in other workbooks by " & _

"the same person who set this password." & DBLSPACE & _

"Now to check and clear other passwords." & AUTHORS & VERSION

Const MSGPWORDFOUND2 As String = "You had a Worksheet " & _

"password set." & DBLSPACE & "The password found was: " & _

DBLSPACE & "$$" & DBLSPACE & "Note it down for potential " & _

"future use in other workbooks by same person who " & _

"set this password." & DBLSPACE & "Now to check and clear " & _

"other passwords." & AUTHORS & VERSION

Const MSGONLYONE As String = "Only structure / windows " & _

"protected with the password that was just found." & _

ALLCLEAR & AUTHORS & VERSION & REPBACK

Dim w1 As Worksheet, w2 As Worksheet

Dim i As Integer, j As Integer, k As Integer, l As Integer

Dim m As Integer, n As Integer, i1 As Integer, i2 As Integer

Dim i3 As Integer, i4 As Integer, i5 As Integer, i6 As Integer

Dim PWord1 As String

Dim ShTag As Boolean, WinTag As Boolean

Application.ScreenUpdating = False

With ActiveWorkbook

WinTag = .ProtectStructure Or .ProtectWindows

End With

ShTag = False

For Each w1 In Worksheets

ShTag = ShTag Or w1.ProtectContents

Next w1

If Not ShTag And Not WinTag Then

MsgBox MSGNOPWORDS1, vbInformation, HEADER

Exit Sub

End If

MsgBox MSGTAKETIME, vbInformation, HEADER

If Not WinTag Then

MsgBox MSGNOPWORDS2, vbInformation, HEADER

Else

On Error Resume Next

Do 'dummy do loop

For i = 65 To 66: For j = 65 To 66: For k = 65 To 66

For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66

For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66

For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126

With ActiveWorkbook

.Unprotect Chr(i) & Chr(j) & Chr(k) & _

Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _

Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

If .ProtectStructure = False And _

.ProtectWindows = False Then

PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _

Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

MsgBox Application.Substitute(MSGPWORDFOUND1, _

"$$", PWord1), vbInformation, HEADER

Exit Do 'Bypass all for...nexts

End If

End With

Next: Next: Next: Next: Next: Next

Next: Next: Next: Next: Next: Next

Loop Until True

On Error GoTo 0

End If

If WinTag And Not ShTag Then

MsgBox MSGONLYONE, vbInformation, HEADER

Exit Sub

End If

On Error Resume Next

For Each w1 In Worksheets

'Attempt clearance with PWord1

w1.Unprotect PWord1

Next w1

On Error GoTo 0

ShTag = False

For Each w1 In Worksheets

'Checks for all clear ShTag triggered to 1 if not.

ShTag = ShTag Or w1.ProtectContents

Next w1

If ShTag Then

For Each w1 In Worksheets

With w1

If .ProtectContents Then

On Error Resume Next

Do 'Dummy do loop

For i = 65 To 66: For j = 65 To 66: For k = 65 To 66

For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66

For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66

For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126

.Unprotect Chr(i) & Chr(j) & Chr(k) & _

Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

If Not .ProtectContents Then

PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _

Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _

Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)

MsgBox Application.Substitute(MSGPWORDFOUND2, _

"$$", PWord1), vbInformation, HEADER

'leverage finding Pword by trying on other sheets

For Each w2 In Worksheets

w2.Unprotect PWord1

Next w2

Exit Do 'Bypass all for...nexts

End If

Next: Next: Next: Next: Next: Next

Next: Next: Next: Next: Next: Next

Loop Until True

On Error GoTo 0

End If

End With

Next w1

End If

MsgBox ALLCLEAR & AUTHORS & VERSION & REPBACK, vbInformation, HEADER

End Sub

5. excel2003怎么加密码怎么设置密码

1，选择“文件”菜单中的“另存为”命令，在弹出的“另存为”对话框中输入文件名。

2，在该对话框中选择“工具”中的“常规选项”。

3，在弹出的“保存选项”对话框中输入密码。Excel提供了两层保护，如果设置了修改权限密码，那么即使打开文件也还需要输入修改权限的密码。

4，单击“确定”按钮，在弹出的密码确认对话框中重新输入一遍密码，然后单击“确认”按钮，保存完成文件的加密工作。

5，选择“工具”菜单的“选项”命令。

6，在弹出的“选项”对话框中选择“安全性”选项卡，可以为当前工作簿设置“打开权限密码”及“修改权限密码”，设置完成后单击“确定”按钮。

7，当重新打开文件时就要求输入密码，如果密码不正确，文件将不能打开。